Wolf CSO30TE/S/TH Mode D'emploi page 8

Oven Operation
Oven Operation
Prior to use, use the test strip provided to determine the
water hardness. The oven defaults to hard water. Refer to
User Settings on page 6 to adjust water hardness.
Follow the steps below to ensure all residual oil from the
manufacturing process has been removed.
Prior to Use:
1 Clean the oven thoroughly with hot water and a mild
detergent.
2 Rinse and dry with a soft cloth.
Turn on cooking ventilation. Some smoke and odor is
3
normal.
Fill and install the water tank.
4
5 Select Convection Steam and adjust the temperature to
410°F . Heat the oven (empty) for 30 minutes.
(210°C)
8 | Wolf Customer Care 800.222.7820
After Each Use:
1 Touch OFF or POWER. For modes using steam, do not
remove the water tank until "WATER IS BEING PUMPED
OFF" no longer appears on the display.
Open the door to the at-rest position and allow to cool.
2
Refer to the illustration below.
3 Once cool, wipe the interior dry.
Close the door.
4
Door at-rest position