CAME ZL92 Mode D'emploi Et Pièces De Rechange page 8

Electrical connection for the photocells functions test
DIR / DELTA S
DOC / DELTA
At each opening and closing command, the control board assesses the e ciency status of the safety devices (photocells). Any anomaly found is signaled
with the ashing of the LED on the control board. Consequently it cancels any commands coming from the transmitter or the button.
Electrical connection to enable the photocell safety test:
- the transmitter and the receiver, must be connected as per the diagram;
- from the "F5" function select which inputs to run the safety test on.
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.