Life & Mobility ORMESA Novus Mode D'emploi page 112
Table des Matières
B-
FIXING THE LEVER OF THE HAND BRAKE
HAIR-DRYER
WASHER
SCREW
NUT
WRENCH
1- CUT AND TAKE 2,5 cm OF THE RUBBER TUBE OUT FROM THE MIDDLE OF THE PUSH HANDLE
2- GET THE PLASTIC PART OF THE BRAKE LEVER WARM BY USING A DRYER
3- PUT THE BRAKE LEVER ON THE PUSH HANDLE
4- FIX AND TIGHTEN THE SCREW, WAASHER AND NUT
45 / 60
Chapitres
Table des Matières
