Waring Commercial BB300 Série Manuel D'instructions page 6

BB320 OPERATION
Follow steps 1–2 from BB300
instructions.
3. This blender is equipped
with an electronic membrane
keypad. The keypad has
HIGH, LOW, STOP, PULSE
and ON/OFF buttons. Always
use HIGH speed for crushing ice.
4. Press ON/OFF button; the blue LED light will turn on.
5. For continuous operation, press either the LOW or
HIGH button. When finished blending, press STOP. For
momentary operation, press the PULSE button; motor
will run on HIGH speed until the button is released.
NOTE: This blender utilizes a Slow Start
beginning HIGH or LOW operation, the unit will start in a
lower speed for 1 second and then switch to the full selected
speed. PULSE utilizes a .5-second Slow Start
for a more even blending of ingredients in jar.
6. Allow motor to come to a complete stop before
removing jar from blender base. Never place the
jar on the motor base or remove it from the motor
base while motor is running.
7. Always hold jar with one hand when starting and while
blending. Never operate without jar lid.
8. Wash and dry jar after each use. See Cleaning and
Sanitizing Instructions.
9. Unplug to turn off all power to blender.
BB340 OPERATION
Follow steps 1–2 from BB300 instructions.
3. This blender is equipped with an electronic membrane
keypad. The keypad has HIGH, LOW, STOP, PULSE
and ON/OFF buttons, as well as a 99-second
feature. When
™
6
. This allows
™