AL-KO HT 600 FLEXIBLE CUT Mode D'emploi page 16

Remove any adjusting key or wrench befo-
re turning the power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in perso-
nal injury.
Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-rela-
ted hazards.
Power tool use and care
Do not force the power tool. Use the cor-
rect power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was desi-
gned.
Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
16
Disconnect the tool from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfami-
liar with the power tool or these instruc-
tions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool's operation.If dama-
ged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
Use of the power tool for operations diffe-
rent from those intended could result in a
hazardous situation.
Service
Have your power tool serviced by a qua-
lifi ed repair person using only identical
replacement parts.
This will ensure that the safety of the power
tool is maintained.
Translation of original user instructions
AL-KO Hedge trimmer