Black & Decker EXPERT TEMP TOD5030SC Guide D'utilisation Et D'entretien page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TOAST
1 .
Select TOAST function using function knob .
2 .
Use the TEMP knob to select desired toast shade, with 1 being the lightest and
7 being the darkest .
3 .
Use the TIME knob to select the number of bread slices being toasted .
4 .
Place food directly on wire rack in the upper rack position . Press the Time knob
(I/O) to begin toasting .
5 .
There will be 3 audible beeps once the toasting cycle is complete and the oven
will stop heating .
B AG EL
1 .
Select BAGEL function using function knob .
2 .
Use the TEMP knob to select desired toast shade, with 1 being the lightest and
7 being the darkest .
3 .
Use the TIME knob to select the number of bagel slices being toasted .
4 .
Place bagel slices, cut side up, directly on the wire rack in the upper rack
position . Press the Time knob (I/O) to begin toasting .
5 .
There will be 3 audible beeps once the cycle is complete and the oven will stop
heating .
P IZZ A
1 .
Place wire rack in the lower rack position .
2 .
Select the PIZZA function using the function knob . Turning the TEMP knob,
adjust temperature to desired temperature .
3 .
Turning the TIME knob, adjust time to set cook time .
4 .
Press the Time knob (I/O) to begin preheating .
5 .
The temperature display will blink while the oven is preheating.
6 .
Once the oven has preheated, you will hear 2 audible beeps and the timer will
automatically begin counting down .
7 .
Place pizza directly on pan and place in oven .
8 .
There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating .
9 .
Unplug the appliance when not in use .
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières