06. OPERATION INSTRUCTIONS
CAUTION: Use only with proper voltage and on a flat, dry surface. During use, do not insert your
hands and/or objects into the safety grill.
INSTALLING THE BLADE
Place the blade correctly on the motor shaft (align the blade
slot with the pin on the shaft) and insert the blade until it
locks into place. Then tighten the blade locking nut No.1
(counterclockwise).
Be sure to tighten the nut properly. Check that the blade
turns well by turning it manually.
INSTALLING THE FRONT GRILL
Place the front grill correctly on the rear grill and tighten the
locking clip No.1 and the screw to lock the assembly.
DESCRIPTION OF THE CONTROL PANEL
1. Timer indicator
2. Speed indicator
3. Button ON/OFF light
4. Timer setting button
5. Operation indicator
6. Speed setting button
7. Button ON/OFF oscillation
8. Button ON/OFF power