Programming The Water Volume; Reset To Factory Settings; Cleaning And Maintenance - Williams-Sonoma SIGNATURE Série Manuel D'utilisateur

PROGRAMMING THE WATER VOLUME

Add fresh water to the tank and switch unit to the ON "I" position..
Once indicator lights stop flashing, insert capsule and place a cup on drip tray under coffee spout.
Press and hold either the single or double cup button. Release button once desired volume is reached.
New volume is now stored.
NOTE: Maximum volume setting for either cup is 100 mL or 3.3 oz.

RESET TO FACTORY SETTINGS

Press and hold down both the small and large cup buttons for 5 seconds.
The buttons will flash quickly 3 times to confirm the unit has been reset.
Both the small and large cup buttons will continue to flash normally.
Solid lights mean the unit is ready to use.

CLEANING AND MAINTENANCE

Be sure to unplug this appliance and let it cool down before cleaning. To protect against electrical shock,
do not immerse the cord, plug or unit in water or liquid. After each use, always make sure plug is removed
from the wall outlet. We recommend that the following is performed on a periodical basis:
Prepare one or more cups to wash the coffee distributor.
Use a dry cloth to clean the removable water tank.
Empty the capsule collection tray and clean it.
Clean the capsule holder with a dry cloth.
Use a damp cloth to gently wipe the drip tray cover. Empty the drip tray and rinse it.
Clean the outside of the machine using a damp cloth. Never submerge the machine.
Replace all parts.
This appliance requires little maintenance. It contains no user serviceable parts. Any servicing requiring
disassembly other than cleaning must be performed by a qualified appliance repair technician.
SO-316393_15397, 15398_WS CapsuleCM_IMr9.indd 5
5
2019-10-11 3:03 PM