Before First Use - Electrolux EAT978 Mode D'emploi

1. Toast slots
2. Carriage lever
3. Browning control knob (1-6)
Stop button
4.
Reheating button
5.
Defrosting button
6.
7. Crumb tray

BEFORE FIRST USE

Remove all packaging materials and wipe the outside of the appliance with a damp cloth.
Before using the appliance for the first time, it is recommended to let the appliance complete a
few toasting cycles without slices of bread on the highest browning setting in a properly ventilated
room.
OPERATION
1. Plug the toaster into the mains socket.
2. Put the bread slice/slices into the slot(s) at the top of the appliance.
• Make sure the crumb tray is fully in place by pushing it firmly into the appliance before using.
3. Turn the browning control knob to the desired setting.
• There are 6 settings: "1" for the lightest setting, "6" for the darkest setting.
• You will need to experiment with this setting depending on your browning colour preference
and the thickness of the bread.
4. Press carriage lever down vertically until it locks in the down position to switch the appliance
on.
• The indicator light on the stop button will illuminate.
• Toasting process can be terminated at any time by pressing
up.
5. Once the bread has been toasted to the selected setting, the bread will automatically pop up
and the carriage lever will automatically spring up to switch off the appliance.
• During toasting, you may observe the toasting colour, if the browning setting is higher than
. The carriage lever will spring
4
EN