Important Safety Notes - Martin Yale 288-4C Instructions D'opération

GB

IMPORTANT SAFETY NOTES

<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by "one person only".
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.)!
<< The machine is not a toy, and is not suitable
for use by children!
The overall technical safety concept of
this machine (dimensions, feed openings,
emergency shutdown devices etc.) does not
provide for any guarantee regarding hazard-
free operation by children.
<< Repairs may only be performed by trained
personnel!
OPERATING FUNCTIONS:
1 = Pushbutton switch „ready" (fig. 1)
Depress this switch to start the machine or
to stop the machine.
2 = Pushbutton
„Cutting system forward" (fig. 1)
Pressing this button starts the cutting system.
Material can now be fed to the shredder.
3 = Pushbutton
„Cutting system reverse" (fig. 1)
Pressing this button starts the cutting system
in reverse.
Note: The cutting mechanism only runs
backwards as long as the button is held
(touch function).
2
3
5
fig. 1
<< Danger of injury! Never insert fingers into
<< Danger of injury! Do not spray and flam-
<< In case of danger switch the machine off
<< Always unplug the machine from the
4 = Sensor (forward run) (fig. 2)
The shredding operation is started as soon
as a sheet of paper passes through the feed
slot.
5 = Pilot lamp „ready" (fig. 1)
Lights when the pushbutton switch (1) is
operated.
6 = Paper feed slot (fig. 2)
7 = CD/DVD/FD feed slot (fig. 2)
8 = Paper receptacle (fig. 3)
9 = Collection tray CD/DVD/FD (fig. 3)
10 = Receptacle full window (fig. 3)
The shredder may not be used as a
step ladder or as a seat. Danger of
falling due to breakage!
4
1
<< Danger of injury! Keep all
loose articles of clothing, ties,
jewelery,longhairorotherloose
objects away from opening!
opening!
mable liquids or gases into the inlet open-
ing!
with the mains switch, or with the emer-
gency switch, or unplug the machine!
mains power supply before opening the
machine!
OPERATION
6
7
fig. 2
4
INITIATION
SCOPE OF APPLICATION:
The papermonster L163 data shredder is
designed for shredding general printed material
and data media such as CDs, DVDs, FDs and
credit cards.
This machine should only be used for
shredding paper and credit cards and
for shredding CDs, DVDs and FDs!
Any attempt to shred other types of data
medium may result in damage to the
machine (e.g. destruction of the cutting
mechanism etc.).
INSTALLATION:
- Unpack and set machine upright.
- Insert the two included locking casters into the
front holes of the cabinet bottom and press
firmly until the axis snaps in place. Insert the two
included non-locking casters into the remaining
back holes the same way (see fig. 4).
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA").
To disconnect the machine from the
power supply system, please unplug
the power plug.
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
OPERATING THE MACHINE:
Turn machine on with pushbutton switch (1) (fig.
1). Pilot lamp lights up (5) (fig. 1).
MATERIAL FEED:
Feed paper (credit card) into the cutting
mechanism through the paper feed slot (6) (Fig.
2).
Feed data carriers (CD, DVD or FD) into the
cutting mechanism individually into the separate
CD/DVD/FD feed slot (7) (Fig. 2).
The machine automatically switches to forwards
running, draws the material in and automatically
switches off after shredding.
Note: For shredding transparent films, the
machine must be manually switched to forwards
running.
When shredding papers, do not shred
CD/DVD/FD at the same time, and vice
versa!
Never feed the shredder with a
quantity of material exceeding the
maximum indicated.
TECHNICAL DATA section!
Should the machine
overloaded, follow the instructions under
"MATERIAL JAM IN MACHINE" under
"MALFUNCTIONS".
L163
Refer to the
become