Nokia BH-111 Mode D'emploi page 6

mode is activated If your cell phone supports the
automatically. If you have A2DP Bluetooth profile and has a
previously paired your headset music player feature, you can also
with a device, press and hold use your device to play music
for 5 seconds. The green through the headset. If your cell
indicator light starts to flash phone does not support the A2DP
quickly. profile, you can separately pair
the headset with a music player
4. Within about 3 minutes, set
that supports this profile. If you
your device to search for
have paired and connected the
Bluetooth devices. For details,
headset to your cell phone,
see the user guide of the
disconnect the headset from it
device.
before pairing the headset with
5. On your device, select the
the music player.
headset from the list of found
You can pair the headset with up
devices.
to 8 devices, but connect it to only
6. If required, enter the passcode
one device supporting the HFP
0000.
profile and another device
In some devices, you may need to
supporting the A2DP profile at a
make the connection separately
time.
after pairing.
When you switch on your headset,
When the headset is paired and
it automatically connects to the
connected, the green indicator
last used device. To manually
light flashes slowly.
connect the headset to the last
Cyan Cyan Magenta Magenta Yellow Yellow
ENGLISH
Black Black