Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
in the display box.
--- Press additional function key >>>
ENG .
2 free points are marked by points
in the display box.
--- Enter command >>> 10
(set clock).
--- Confirm entry by pressing >>>
key ENT . A weekday specifica-
tion appears in the display box.
Number 1 ≈ Monday;
Number 2 ≈ Tuesday;...
Number 7 ≈ Sunday
--- Enter desired weekday number
via the numeric programming pad
(overwriting displayed weekday).
--- Confirm entry by pressing
>>> key ENT . The time
appears in the display box.
--- Enter current time (in hours,
minutes and seconds) via the
numeric programming pad
(overwriting displayed weekday).
--- Confirm entry (clock start) by
means of >>> key ENT .
--- 2 free digits appear in the display
box, which are occupiable by the
entry of a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirming the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- turn key-operated switch to
operating position.
Programming:
Summertime/standard time
(command 11)
Programming procedure:
setting of sumertime or standard time
(programming of summertime/stan-
dard time is effectable on channels 1
or 2, however, entry is valid at all
times for both channels).
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears
in the display box.
--- Press additional function key >>>
ENG .
2 free points are marked by points
in the display box.
--- Enter command >>> 11
(command summer/standard).
--- Confirm entry by pressing
>>> key ENT .
The information SZ 0 , stan-
ding for standard time or, SZ 1 ,
standing for summertime,
appears in the display box.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming pad of the door
coding systems.
--- If the number >>> 0 or 1 is
entered and confirmed by >>>
key ENT , 2 free digits appear
in the display box, which are
occupiable by the entry of a new
command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirming the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
Programming:
Continuously
unlocked periods
(command 15)
Continuously unlocked door periods
makes it possible that the corres-
ponding door is freely accessible,
dependent on time, without any code
number entry. The duration of validity
must be programmed each time with
reference to the weekday. 10 con-
tinuously unlocked periods are avai-
lable per channel (door) for this ad-
ditional function.
Programming procedure:
setting of continuously unlocked
periods
channel 1 = door 1
channel 2 = door 2
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears
in the display box.
--- Press additional function key >>>
ENG . 2 free digits are marked
by points in the display box.
--- Enter command >>> 15
(command continuously
unlocked period).
--- Confirm entry by pressing
>>> key ENT . The information
dE 0 , standing for continuously
unlocked period not activated or,
dE 1 , standing for continuously
unlocked period activated,
appears in the display box.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming pad of the door
coding systems.
--- If the number >>> 0 is entered
(continuously unlocked period not
activated) and confirmed by
>>> key ENT , 2 free digits
appear in the display box, which
are occupiable by the entry of a
new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- If activation status >>> 1 is
entered (continuously unlocked
period active), programming can
be continued as described in the
following.
-*- 10 storage locations are available
for the continuously unlocked
door period. The starting and
finishing times of the continuously
unlocked period is hereby
programmable with reference to
the weekday. When programming
a contiuously unlocked period
all 10 storage locations have to
keyed through.
All data can be overwritten or
reset to 0000 by means of the
>>> key CE (all starting, finish-
ing times and the weekday are
preset to 0 ex-factory. All entries
or confirmations have to be
confirmed by means of >>> key
ENT .
--- Confirm entry by pressing >>>
key ENT .
The information A (time) appears
in the display box for the starting
time of the first continuously
unlocked period.
>1< Enter desired starting time,
4 digits in hours and minutes, via
the numeric programming pad
(possibly overwriting displayed
time).
--- Confirm entry by pressing the
>>> key ENT .
The information E (time)
appears in the display box,
standing for the finishing time of
the first continuously unlocked
period.
--- Enter desired finishing time,
4 digits in hours and minutes, via
the numeric programming pad
15
Publicité
Table des Matières
