To-Dos / Not-To-Dos; Ign Terminal (Ignition) - Thitronik G.A.S.-pro III Notice D'utilisation

English

3. To-Dos / Not-To-Dos

To-Dos
Pay attention to the accessibility of a suitable voltage
source.
External sensor must only be extended a total of 7 meter
cable length.
A safety distance of one meter to batteries and bathroom
must be maintained.

4. IGN Terminal (ignition)

The IGN terminal is used for connecting the vehicle ignition (t. 15) to the device. If a volt-
age is applied, the G.A.S.-pro III (CO) is silenced. I.e. there is no radio signal to WiProIII /
CAS III, no acoustic signal from the internal piezo and no control of the siren output (out-
put SIR+). The LEDs possibly emit an alarm (see quick guide).
Not-To-Dos
Do not mount the device and external auxiliary sensors
across from heating outlets.
11