Field Of Application; Aggregate Operation; Commissioning; Installation (As Stand/Mast Luminaire) - Setolite ALDEBARAN 360 GRAD FLEX Instructions D'utilisation

In these cases, the luminaire must be sent in for
repair.
Repairs to the luminaire must be carried out only by
the manufacturer, his customer service department
or a qualified electrician. A qualified electrician has
the professional training, knowledge and experience,
as well as knowledge of the pertinent standards, to
assess the work they are required to carry out and re-
cognize possible hazards. Warranty repairs are carried
out only by the manufacturer.

Field of application

ALDEBARAN
- luminaires are applicable as indoor
®
lighting and, depending on the model and product,
also as outdoor lighting for industry, crafts, work-
shops, tents, rescue services, energy suppliers, rail
and road transport etc. ALDEBARAN
developed to offer you optimal illumination directly
at the workplace.

Aggregate operation

The electrical connection of your product is intended
for the mains. If you want to operate the product
in a power outage with an aggregate / emergency
generator, its technical values (frequency, voltage,
grounding) have to match with the ones of the mains
and meet at least the power input of your device.
Here, occurring inrush currents have to be conside-
red. For the use of our luminaire at a generator, a
synchronous generator is to be used.
Recommended generator power: at least 3KW
ATTENTION!
Please consider the operation instructions of
the generator for this and/or ask a qualified
electrician.

Commissioning

The luminaire is only to be connected to alternating
current (AC) – with voltage according to type plate
– to a properly installed protective contact socket.
Please make sure that your installation meets the
relevant VDE guidelines.
If you have any questions concerning this, please
refer to your energy supplier or your qualified elec-
trician.
Of course we are also available for your questions.
When the luminaire is operated with other connec-
tor systems (not Schuko
the type plate is to be considered.
Lay the cables in a way that no trip hazards occur
and that they are safe from mechanical damages
like tearing off or running over. If necessary, fix the
cables with adhesive tape or cable ties.
•
•

Installation (as stand/mast luminaire)

luminaires are
®
The ALDEBARAN
/ ambient air for proper operation. The luminaire
has to be installed free-standing with at least 0.5m
space to all sides.
The luminaire can be operated on several mast /
stand systems. Therefore, a mast support is available
at the luminaire. The support is suitable for a DIN bolt
(d=30mm).
Make sure that your mast / stand system in action is
properly constructed for the weight of the luminaire.
Implicitly fix the luminaire with the star grip after
putting it on your mast / stand system. That way,
you avoid accidents.
ATTENTION!
), the voltage according to
®
WARNING! Tripping hazard!
Make sure that the luminaire is set up and
fixed safely before use.
Before use of the luminaire, the protective
foil on the front screen is to be removed.
ATTENTION!
360 Grad Flex requires room
®
ATTENTION!
WARNING! Risk of injury!
Star grip
11