Product Specifications - F.F. Group ELM 38/1600 PLUS Notice Originale

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

ELM 38/1600 PLUS

mental capabilities, or lack of experience and knowl-

edge, unless they have been given supervision or

instruction concerning use of the machine by a per-

son responsible for their safety. Children should be

supervised to ensure that they do not play with the

machine.

Never mow while people, especially children, or pets

are nearby.

The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Do not operate the machine when barefoot or wear-

ing open sandals, always wear substantial footwear

and long trousers.

Thoroughly inspect the area where the machine is to

be used and remove all stones, sticks, wires, bones

and other foreign objects.

Before using, always visually inspect to see that the

blades, blade bolts and cutter assembly are not worn

or damaged. Replace worn or damaged blades and

bolts in sets to preserve balance.

Mow only in daylight or in good artificial light.

Avoid mowing in bad weather conditions especially

when there is a risk of lightning.

Avoid operating the machine in wet grass, where

feasible.

Walk, never run.

Never operate the appliance with defective guards

or shields, or without safety devices, for example de-

flectors and/or grass catchers in place.

Always wear ear protection.

Working on banks can be dangerous.

Do not mow on excessively steep slopes.

Always be sure of your footing on slopes or wet

grass.

Mow across the face of slopes - never up and down.

Exercise extreme caution when changing direction

on slopes.

Use extreme caution when stepping back or pulling

the machine towards you.

Never mow by pulling the mower towards you.

Stop the blades if the machine has to be tilted for

transportation when crossing surfaces other than

grass and when transporting the machine to and

from the area to be mowed.

Do not tilt the machine when starting or switching on

the motor, except if the machine has to be tilted for

starting in long grass. In this case, do not tilt it more

than absolutely necessary and tilt only the part which

is away from the operator. Always ensure that both

hands are in the operating position before returning

the machine to the ground.

Switch on the motor according to the instructions

with feet well away from rotating parts.

Do not put hands or feet near or under rotating parts.

Always stand clear of the discharge zone when oper-

ating the machine.

Never pick up or carry the machine while the motor

is running.

Do not modify this product. Unauthorized modifica-

tions may impair the safety of your product and may

result in increased noise and vibration.

Regularly inspect the supply cable and any extension

cables. Do not connect damaged cables to the supply

or touch a damaged cable before it is disconnected

from the supply. A damaged cable can lead to contact

with live parts. Beware electric shock hazard.

REMOVE THE PLUG FROM THE SOCKET

Whenever you leave the machine.

Before clearing a blockage.

Before checking, cleaning or working on the ma-

chine.

After striking a foreign object. Inspect the machine

for damage and make repairs as necessary.

If the machine starts to vibrate abnormally (check

immediately).

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the ma-

chine's rating plate are compatible with the power

supply you intend to connect it to.

This appliance is Class II* and is designed for connec-

tion to a power supply matching that detailed on the

rating label and compatible with the plug fitted. If

an extension lead is required, use an approved and

compatible lead rated for this appliance. Follow all

the instruction supplied with the extension lead.

*Double insulated: This product requires no

earth connection as supplementary insulation

is applied to the basic insulation to protect

against electric shock in the event of failure of

the basic insulation.

GUIDELINES FOR USING EXTENSION CORDS

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will

draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

Always replace a damaged extension cord or have

it repaired by a qualified person before using it.

Protect your extension cords from sharp objects,

excessive heat and damp/wet areas.

Use a separate electrical circuit for your tools. This

circuit should be protected with the appropriate

time-delayed fuse. Before connecting the motor to

the power line, make sure the switch is in the OFF

position and the electric voltage is rated the same

as the voltage stamped on the motor nameplate.

Running at a lower voltage will damage the motor.