Controleur À Minuterie De Dépoussiéreur Série Dct1000 - ISTblast AW16000 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONTROlEUR À mINUTERIE DE DÉPOUSSIÉREUR SÉRIE DCT1000
Spécifications – Installation et mode d'emploi (EN ANGLAIS)
pressure switch (such as the Dwyer Photohelic®) can be used for High/Low limit control. As with traditional
Dwyer products, the Dwyer DCT1000 was designed so that it is easy to use, thus allowing for a quick and
easy start up for your dust control applications. The contents inside this installation and operating manual
will guide you through the features of the DCT1000 and how they can be applied to get the most out of your
dust control requirements.
SPECIFICATIONS
Output Channels: 6, 10, & 22 channels. Expandable to 255 channels using DCT1122 & DCT1110 channel
expander boards.
Power Requirements: 85 to 270 VAC, 50 or 60 Hz.
Solenoid Supply: 3A maximum per channel.
Fuse: 3A @ 250 VAC. Low voltage control circuitry is isolated from the line voltage for system safety.
Temperature Limits: - 40 to 140°F (- 40 to 60°C).
Storage Temperature Limits: -40 to 176°F (-40 to 80°C).
On Time: 10 msec to 600 msec, 10 msec steps.
On Time Accuracy: ±10 msec.
Off Time: 1 second to 255 seconds, 1 second steps.
Off Time Accuracy: ±1% of the value or ±50 msec, whichever is greater.
Weight: 1 lb 3.0 oz (538.6 g).
Agency Approvals: UL, cUL.
AW16000 - Manuel d'instructions
L
a référence en treaitement de surface
Thank you for purchasing the DCT1000
Dust Collector Timer Controller. You have
selected a state of the art dust collector
timer control that will provide years of
dependable operation and service.
The
DCT1000
Dust
Controller was designed to be used
with pulse-jet type dust collectors for
on-demand
or
continuous
applications.
Continuous cleaning applications do not
require external inputs and can be used for
time based "on-demand" cleaning through
use of the cycle delay feature.
For on-demand applications, the plug-in
pressure modules (DCP100A/200A) can
be used to take full advantage of all the
features the DCT1000 offers, or an external
Collector Timer
cleaning
24

Publicité

Table des Matières
loading

Produits Connexes pour ISTblast AW16000

Table des Matières