Gardner Bender 910B Manuel De L'utilisateur page 6

4. Bend until the point on
the top of the conduit
bender aligns with
desired teardrop arrow.
Please see Figure
3 & 4.
*Overbend slightly to
adjust for conduit metal
springback.
*Cut off any excess
conduit using Vise-mate
feature. Please see
Figure 5.
5. When using models 930B, 932, 931B,
931H, 930H and 932H, vial will level at
45° & 90°.
Figure 6
3
Vial Level
Point at tip
of Bender
Figure 3
Line of Sight
Figure 4
Insert conduit through
ViseMate™ opening and cut
conduit to desired length
™
Figure 5
Vial Level