Koenic KMO 4341 Mode D'emploi page 19

• The baking mode (function) can be changed
during baking process.
• When using the timer control the heating
elements are automatically switched off
after the preset time has expired.
• For switching the oven off manually, turn
the timer/ on/off switch to position OFF.
• For opening the possibly hot door use the
handle only.
Caution
Hot steam could be emitted when opening
the oven door. Thus always open the door
carefully.
• Use oven mitts or some cloth or the
provided baking grate handle when taking
out the baking grate or tray. A hot baking
grate or tray shall only be placed on a heat
resistance surface.
• For taking out the rotisserie use the handle
provided.
• Unplug the product after use.
Caution
Depending on the type and quality of the
food, it could become very hot during grilling
/ baking. Especially foods with a high water
content, such as tomatoes, will become very
hot. Be extremely careful when grilling and
especially when removing these types of
foods.
IM_KMO4341_180306_V05_HR.indb 19
Cleaning and care
Caution
Always unplug the product from the power
outlet and let it cool down before cleaning.
Fig. Before each cleaning unplug the
12
product and let it cool down.
• Remove grease which possibly
dropped onto the lower heating
element with a damp cloth.
• Clean baking tray, grate, rotisserie and
clamps with a mild standard dish liquid.
• Remove the crumb tray and clean it.
Use paper towels to wipe off larger
amounts of grease.
• After cleaning insert the crumb tray
again.
• When cleaning, never use solvents
or abrasive materials, hard brushes,
metallic or sharp objects. Solvents
are harmful to human health and can
attack plastic parts, while abrasive
cleaning mechanisms and tools may
scratch the surface(s).
Replacing the oven light
Warning
Let the product cool down. Unplug the
product from the power outlet before
replacing the lamp to avoid the possibility of
electric shock.
If the oven lighting is defective, the bulb must
be replaced.
Fig. First remove the lamp cap and then
13
turn the light bulb counterclockwise.
Replace the bulb with a lamp of the
same type (230V 25W T300, E14).
The installation is done in reverse order.
Make sure the light bulb and lamp cover
are properly in place.
English
19
6/3/18 2:01 pm