Drain Kit - AGA marvel 61HK Instructions D'installation, D'utilisation Et D'entretien

Drain Kit Installation: (See Figure 25)
1. Remove the cardboard box with the drip tray from in-
side the cabinet and remove the parts from the box.
2. Remove the nut and washer from the drip tray.
3. Push the threaded stem of the drip tray through the
hole in the top of the cabinet and secure from inside
the cabinet with the washer and the hex nut. Do not
overtighten the nut.
4. Push one end of the drain hose over the end of the drip
tray stem.
5. Push the other end of the hose through the hole in the
center of the cap. This should be a snug fit.
6. Screw the bottle onto the cap and place the bottle
inside the cabinet.
Cleaning the Bottle:
When the bottle is full unscrew it from the cap and empty it.
The bottle can be cleaned with hot soapy water.
DRAIN KIT INSTALLATION (OPTIONAL)
Washer
Nut
Drain Hose
Figure 25
Drip Tray
Hole in Cabinet
Bottle Cap
Bottle
11