monzana DBDL006 Manuel D'instructions page 17

Nail / Staple types:
2mm(0.079")
10mm 3/8"
15mm 5/8"
20mm 3/4"
25mm 1"
30mm 1-3/16"
32mm 1-1/4"
35mm 1-3/8"
38mm 1-1/2"
40mm 1-5/8"
45mm 1-3/4"
50mm 2"
1.26 x 1.05mm
(0.050")(0.041")
18Ga.
TECHNICAL DATA
PRODUCT SIZE:
Length
Width
Height
WEIGHT
NORMAL OPERATING
PRESSURE
MAGAZINE CAPACITY
TRIGGER MECHANISM
NAIL SIZE
18-Gauge nails
18-Gauge staples
Features
• 360° adjustable exhaust duct.
• Allows the user to divert dirty air.
• Comfortable grip.
•
• Ergonomic casing.
• Durable and comfortable for long periods of use
17
www.DeubaX XL . de
5/7mm(1/4")
13mm 1/2"
16mm 5/8"
19mm 3/4"
25mm 1"
32mm 1-1/4"
38mm 1-1/2"
40mm 1-5/8"
1.26 x 1.05mm
(0.050")(0.041")
18Ga.
225mm
240mm
56mm
1,30kg
70-110 PS (0,5-
0,75MPa)
100 Nail
Contact release
10-50mm
13-40mm
Follow the steps below to prepare your device
for use:
1. All users and their immediate supervisor must
operators prior to use.
2. Each device has its own copy of the safety
future reference.
3.
system and a water separator into your
compressed air unit as per the manufacturer's
close as possible to the staple unit, preferably
within 3m.
4. Select pressure hoses with an internal
diameter of at least 0.64cm and a maximum
length of 30m.
CAUTION: To reduce the risk of injury caused
by a burst hose, use a hose which is designed
for a minimum of 200 PSI.
5. Use the correct connectors for the hose.
The stapler and air hose need a coupling so
no pressure remains when the connector is
separated.
CAUTION: Never use non pressure-relieving
and/or quick coupling sockets on this device.
Non pressure-relieving couplings and female
nail gun so that the compressed air escapes
from the device as soon as the compressed air
6. Set the pressure regulator to between 70 PSI
and 110 PSI. The best pressure is the lowest
level at which you can successfully work.