FLIR LOREX LNZ32P4 Série Manuel D'instructions page 27

7
Controlling the PTZ camera with LNK Series NVRs
• Hover the mouse near the top of the live viewing area for the PTZ camera
to reveal the Mini Menu, then click
If prompted, enter the user name (default: admin) and your secure password.
To use the PTZ controls:
1. Channel: Select the channel of the PTZ camera you want to control.
2. Navigation Controls: Click the directional arrows to move the PTZ cam-
era. Click
3. Start Cruise: Cycles between preset viewing points automatically.
4. Close PTZ Controls
5. Speed: Set the speed of the PTZ camera's movement.
6. Zoom: Click –/+ to zoom in or out.
7. Focus: Click –/+ to adjust the focus.
8. Iris: Click –/+ to set the iris. Adjusting the camera's iris settings allow you
to control the amount of light that enters the camera's lens. The higher the
iris value, the greater the amount of light that enters the camera's lens.
Adjust the camera's iris settings to match the environment where the camera is in-
stalled. Too much light exposure might result in a very bright camera image.
#LX400075; r.41474/41994; en-US
NOTE
to begin autopan (PTZ camera pans around automatically).
CAUTION
.
24