FLIR LOREX LNZ32P4 Série Manuel D'instructions page 16

4
Installation
8. Connect the camera cable as shown in the 3 Connecting the Camera sec-
tion, then feed the cables through the cable hole in the back plate (at-
tached to the mounting surface).
If you run the cables along the mounting surface, you must run the cable through
the side notch on the wall mounting bracket. The camera cable will hang alongside
the wall mounting bracket — see image below for reference:
1. Side Notch
#LX400075; r.41474/41994; en-US
CAUTION
13