Farelek MS 12000 Notice Originale page 23

SELECTION OF FUNCTIONS
1. Start the air conditioner:
Press the button «09», and this will start the apparatus.
2. Button "MODE" : Button «01» allows choice of functioning mode of the appara-
tus. There are 3 modes to choose from: ventilation, cooling function, dehumidifica-
tion function.
3. Button for adjusting the airflow rate or fan speed button: there are three flow rate
speeds for the VENTILATION and COOL AIR modes. When you have selected the
function mode of the unit, press on button «11» to obtain HIGH, MEDIUM, or LOW.
4. Button «08» and «10» for adjusting the temperature: As soon as the air conditio-
ner is working, in cooling COOL AIR mode, the display on the control panel indicate
the desired temperature then room temperature. For good practice, it is preferable to
adjust the required temperature before choosing the function mode.
Use the arrows
red temperature.
5. Time-set button :
Use button «06» to choose a number of hours of functioning of the air conditioner.
Use the arrows
mum 24 hours.
16
112515-Manual-C.indd 23
& to increase or reduce the programming of the requi-
& To increase or decrease 30 mn in 30 mn till maxi-
Note :
To decrease the consumption of energy, this
device is equiped of water spraying pump to
cool the compressor.
When "03" led light, add water (maxi 180 ml =
3 doses) add water in "16" tank.
EN
15/07/13 10:31:44