Kenmore 253.35028 Manuel D'utilisation Et D'entretien page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADDITIONAL THINGS YOU SHOULD KNOW
Now that you understand the basic operation functions, here are more control features with which you should become
familiar.
The "cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents
overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility
of having to roll through to select another mode.
The control will maintain the set temperature within 1 degree Celsius, between 16 °C and 32 °C(60 °F and 90 °F) .
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the
other and back, press and hold both the "TEMP/TIMER" Up(
FAULT CODES:
If the display reads "ES" or "AS", a sensor has failed. Contact 1-800-4-MY-HOME® for repair.
Evaporator coil sensor
AUTO RE-START :
After a power outage, the unit will remember the last setting and return the unit to the same setting once power is restored.
All manuals and user guides at all-guides.com
) and Down (
LOUVERS
) buttons for 3 seconds.
Air temperature sensor
Air Directional Louvers
Air directional louvers control air flow direction. Your air
conditioner has the 4-way directional system described
below.
The louvers will allow you to direct the air flow Up or
Down and Left or Right throughout the room as needed.
Use the center handle to adjust the air directional
louvers side-to-side until the desired Left or Right
direction is obtained. Pivot horizontal louvers with your
fingertips until the desired Up/Down direction is
obtained. There are a total of 4 possible air directional
orientations available with this system.
8

Publicité

Chapitres

Table des Matières
loading

Table des Matières