Using Optional Equipment - Sony WEGA KE-42MR1 Mode D'emploi

Using Optional Equipment

1
Connect your equipment to the designated TV socket, as indicated on pages 61, 62 and 63.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press
symbol appears on the screen. Also as you press
select indicator on the media receiver unit lights up.
.
Symbol Input select
indicator
1 or 2
1 or 2
3 or 4
3
S
4
5
6
6
S
PC PC
MEMORY MEMORY
STICK STICK
If your DVD recorder is connected to both the Scart connector
C , P /C jacks of
B R R
the "Feature" menu (page 36).
4
Press the button on the remote control to return to the normal TV picture.
The indicator on the media receiver unit lights up.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket and select
instructions above. Refer to "Sound Adjustment" and select "Dual Sound" "A" on the sound
menu screen (page 29).
Input Signals
1 or 2 • Audio / video input signal through the Scart connector
H.
• RGB input signal through the Scart connector H. This
1 or 2
symbol appears only if an RGB source has been
connected.
3 or 4 • Audio / video input signal through the Scart connector
I or N.
• S Video input signal through the Scart connector I.
3
• RGB input signal through the Scart connector N. This
4
symbol appears only if an RGB source has been
connected.
5 • Component input signal through the Y, P
jacks L and Audio input signal through K.
• Video input signal through the phono socket F and
6
Audio input signal through G.
• S Video input signal through the S Video input jack E
6
S
and Audio signal through G.
• RGB input signal through the 15-DSub connector B
and audio input signal through C.
• Data input from a "Memory Stick" inserted in
"Memory Stick" slot A.
5, select the input connector by using "AV4 Input Select" option in
repeatedly until the correct input
repeatedly, the corresponding input
4/
5 input signal using the
Additional Information
/C , P /C
B B R R
and the Y, P /
B
GB
65