Storage; Care And Maintenance; Troubleshooting - Kärcher ProHD 400 Ed Mode D'emploi

– Only lift the appliance using the car-
rying handle.
– Do not use stop chains.
– Protect the lifting device from inad-
vertent load release.
– Remove spray lance with trigger
gun, nozzles, surface cleaner and
other loose objects prior to trans-
portation by crane.
– Do not transport any articles on the
appliance during the lifting process.
– The appliance must only be trans-
ported by properly trained crane
personnel.
– Do stand below the load.
– Ensure that no persons are present
in the immediate vicinity of the
crane.
– Do not leave the appliance on the
crane unattended.

Storage

CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in
interior rooms.

Care and maintenance

DANGER
Risk of injury by inadvertent startup of
appliance and electrical shock.
First pull out the plug from the mains
before carrying out any tasks on the
machine.
Safety inspection/ maintenance
contract
You can sign with your dealer a con-
tract for regular safety inspection or
even sign a maintenance contract.
Please take advice on this matter.
Before each use
 Check connection cable for damag-
es (risk of electrical shock); get the
damaged connection cable re-
placed immediately by an author-
ised customer service person/ elec-
trician.
 Check the high pressure hose for
damages (risk of bursting).
Please arrange for the immediate
exchange of a damaged high-pres-
sure hose.
 Check appliance (pump) for leaks.
3 drops per minute are permitted
and can come out from the lower
side of the appliance. Call Custom-
er Service if there is heavy leakage.
 Clean the sieve in the water con-
nection.
Clean the sieve in the water
connection
 Take out sieve.
 Clean the sieve from the outside
and rinse it.
 Insert sieve.
Every 500 operating hours, at
least annually
 Have the maintenance of the de-
vice performed by the customer
service.

Troubleshooting

DANGER
Risk of injury by inadvertent startup of
appliance and electrical shock.
– Prior to all work on the appliance,
switch off the appliance and pull the
power plug.
– Get the electrical components
checked and repaired only by au-
thorised customer service persons.
– 9
EN
Weekly
11