Worx Maker X WX742L Manuel D'instructions page 3

Table des Matières

Publicité

l) Keep battery pack clean and dry.
m) Wipe the battery pack terminals with a clean dry cloth if they become dirty.
n) Battery pack needs to be charged before use. Always use the correct
charger and refer to the manufacturer's instructions or equipment manual
for proper charging instructions.
o) Do not leave battery pack on prolonged charge when not in use.
p) After extended periods of storage, it may be necessary to charge and
discharge the battery pack several times to obtain maximum performance.
q) Battery pack gives its best performance when it is operated at normal room
temperature ((68 °F ± 9 °F) 20 °C ± 5 °C).
r) When disposing of battery packs, keep battery packs of different
electrochemical systems separate from each other.
s) Recharge only with the charger specified by Worx. Do not use any charger
other than that specifically provided for use with the equipment. A charger
that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
t) Retain the original product literature for future reference.
u) Use only the battery pack in the application for which it was intended.
v) Remove the battery pack from the equipment when not in use.
w) Dispose of properly.
SYMBOLS
To reduce the risk of injury, user must read instruction manual
Warning
Do not burn
Batteries may enter water cycle if disposed improperly, which can
be hazardous for ecosystem. Do not dispose of waste batteries as
unsorted municipal waste.
Li-Ion battery, battery must be recycled
EN
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Maker x wx742l.x

Table des Matières