Automatic Icemaker - LG LFX21976 Série Manuel Du Propriétaire

28 HOW TO USE

Automatic Icemaker

* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and
sent to the dispenser. The icemaker will
produce 70~210 cubes in a 24-hour period,
depending on freezer compartment temperature,
room temperature, number of door openings and
other operating conditions.
It takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice. Wait
72 hours for full ice production to occur.
Ice making stops when the in-door ice bin is full.
When full, the in-door ice bin holds approximately
6 to 8 (12~16 oz or 340~455 cc) glasses of ice.
The water pressure must be between 20 and 120
psi (140 and 830 kPa)on models without a water
filter and between 40 and 120 psi (280 and 830
kPa) on models with a water filter to produce the
normal amount and size of ice cubes.
Foreign substances or frost on the ice-detecting
sensor can interrupt ice production.
Make sure the sensor area is clean at all times
for proper operation.
Power
Switch
Ice-detecting
Sensor
Icemaker
Water fills the ice tray.
60 minutes after water has been added
to the ice tray, the ice tray will sit slightly
tilted to help the cold air reach the ice.
The ice-detecting sensors will sense
when the ice is ready to be dumped
into the ice bin.
Turning the Automatic Icekamer
On or Off
To turn off the automatic icemaker, set the
icemaker switch to OFF (O). To turn on the
automatic icemaker, set the switch to ON (I).
1 hour later from
supplying water