Landmann Oakley 22582 Instructions D'assemblage Et D'utilisation page 7

Oakley
OAKLEY FIRE TABLE ASSEMBLY
INSTRUCTIONS
STEP 5: ASSEMBLE THE BATTERY
Remove the ignitor cap and slide one
new AAA battery (not included) into the
battery slot. The negative side of the
battery goes in first. Reinstall the ignitor
cap securely. Insure the ignitor works
by pressing the cap and hearing for the
spark from the electrode located inside
the ignitor guard.
STEP 6: PLACE THE LAVA ROCK
Carefully open the package for the lava
rock [ F ] and slowly pour the rock evenly
into the firebowl.
To ensure proper function, make sure
that the lava rock does not enter the
inside of the ignitor guard. The lava
rocks can be placed around and on top
of the ignitor guard. Keep inside of the
ignitor guard clear.
CAUTION: Carefully handle the lava rock
as there could be lava chips or shards
they can be very sharp.
DANGER: Keep children away from the
lava rocks. Keep fire pit cover in place
when not in use. Do not allow children
to play with the lava rocks as they can
be a choking hazard.
STEP
5
STEP
6
PAGE 7
AAA
F