Package Contents; Important - Lindy 32541 Manuel Utilisateur

User Manual
Introduction
Thank you for purchasing the LINDY VGA & Audio Fibre Optic Extender. This VGA & Audio
Extender allows you to transmit VGA signals up to resolutions of 1920x1080@60Hz, up to a
distance of 750m using 4 LC fibre optic cables or two equal length Duplex LC fibre optic cables.

Package Contents

 VGA & Audio Transmitter
 VGA & Audio Receiver
 2 x Multi-Country Power Adapter (5VDC)
 This User Manual
Specification
 Extends VGA & Audio signals up to 750m (OM3) or 500m (OM2) using multimode fibre
optic 4x LC or 2x LC Duplex cables with identical length
 Maximum resolution 1920x1080p@60Hz
 Power requirement 5VDC ~350mA per unit, DC connector: 3.5/1.35mm
 Laser Class 1
 Environmental Specifications: For Indoor use only:
o Operating temperature: 0°C to 70°C
o Storage temperature: - 20°C to 85°C
Installation
1. Connect the VGA and audio cables of the source to the VGA & Audio input ports of the
transmitter module (TX). You can use the VGA-Output of the Transmitter (TX) to connect
a local display.
2. Connect the VGA and audio cables of the display/speakers to the VGA and audio output
ports of the receiver module (RX)
3. Connect the fibre optic cables to Transmitter (TX) and Receiver (RX).
IMPORTANT: please make sure that you plug the LC cable in the correct order. Port 1
needs to be connected to Port 1, etc. You'll find the respective port numbers on the TX
and RX modules.
IMPORTANT: please make sure that the fibre connectors are clean before plugging
them. Dust or even tiny damage like a scratch can influence the communication.
4. Connect the included power supplies to the power input of the transmitter/receiver and to
a free power socket.
5. The Extender is now ready to use.
Power on your computer and display, when the computer has completed booting adjust
the resolution to match the native resolution of the display.
Important: To prevent connection problems please ensure that the source device is adjusted to
one of the supported resolutions, please refer to the EDID presets at the end of this manual.
English