Operation - Use - Bestron ADA670 Mode D'emploi

operAtion - General information
The appliance is intended
only for domestic use,
not for professional use.
1. Ceramic plates
2. On/off switch
3. Hang up loop
4. Power cord and plug
operAtion - before use for the first time
1. Remove the packaging.
2. Clean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal and will stop on its own. Make sure there is sufficient ventilation.
operAtion - before you start styling
• Be sure your hair is always washed. When your hair contains leftovers of fixation products, it can lead
to sticky hair afterwards. Wash your hair with moisturising shampoo and conditioner (prefer one which
you don't have to wash out).
• Be sure that the hair is completely dried up before you start styling.

operAtion - use

1. Make sure that the On/0ff switch (2) of the appliance is switch to OFF .
2. Insert the plug in the wall socket.
3. Putt the On/0ff switch to ON
operAtion - styling
1. Take a little lock of hair and comb it through.
2. Hold this lock of hair and put the straightener at the beginning of the hair (see figure 2).
3. Close the straightener and pull it slowly to the end of the hair.
4. Repeat this by every hair lock until you styled all your hair.
1.
Figure 2
Styling
16
user's instructions
2.
Figure 1
3.