Washing Options; Demo Mode; Child Safety Lock - SCHOLTES LVL 12-67 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Accidental interruptions
If the door is opened during the wash cycle, or if
there is a power cut, the wash programme or
Delayed Start option (if selected) is interrupted.
When the door is opened, the text CYCLE PAUSED
appears on the display, alternating with the text
CLOSE DOOR TO RESTART.
If there is a power cut the display switches off.
The wash cycle will restart as soon as the power
returns.
Delayed Start
It is possible to delay the start time of the
programme for a period of time between 1 and 24
hours.
1.After selecting the desired wash programme and
any other options, press the DELAYED START
symbol.
2.Use the UP/DOWN arrows to select the moment
at which you wish the wash to begin. Press OK to
confirm the selection.
3.If the START/PAUSE button is pressed, the
display will show a countdown figure and the text
WAITING will appear.
4.When the set time has elapsed you will hear a
long beep, the programme will start and the time
remaining until the completion of the programme
will be shown on the display.
To modify the set time, press the DELAYED START
symbol again; use the UP/DOWN arrows to
increase, reduce or reset the delayed start
function.
 The Delayed Start function cannot be set once
the wash has been started.

Child safety lock

The keypad lock function can be activated when
the dishwasher is switched off or when a wash is
in progress.
To lock the control panel, press the "KEY" symbol
and press OK to confirm the selection. A short
beep will indicate its activation.
To unlock it, press the KEY symbol again and
confirm by pressing OK.

Demo mode*

If the text DEMO ON appears when the
dishwasher is switched on and alternates with the
name of the wash, this means that a
demonstration programme has been activated.
To deactivate it, press the ON/OFF and UP
ARROW symbols in sequence.
The text DEMO OFF will appear on the display.

Washing options*

 The OPTIONS may be selected, modified or
reset only after the wash programme has been
chosen and confirmed using the OK symbol, and
before the START/PAUSE symbol is pressed.
 Only the options which are compatible with the
type of wash programme selected will be shown
on the display.
1.After selecting the programme and confirming it
using OK, press the OPTIONS symbol and the
options MENU will appear on the display.
2.Use the UP/DOWN arrows to select the desired
option.
3.Press the OK symbol to confirm the selection.
Repeat steps 2 and 3 whenever you wish to select
other options.
To exit the options menu press the OPTIONS
symbol again.
Press START/PAUSE, a long beep indicates that
the programme has started.
Half load using the upper and lower racks
 With the Half Load option, it is possible to select
whether to perform the wash on the upper or lower
rack. Once the option is highlighted, press the OK
symbol once or twice to select the upper or lower
rack respectively; if the OK symbol is pressed
three times the half load option is deselected.
Remember to load the selected rack only, and to
reduce the amount of detergent accordingly.
 It is better to use powder detergent in this case.
 This option is incompatible with the programme:
Quick.
Tablets and Extra Dry
 The TABLETS option, once selected, remains
stored for successive washes unless it is
deselected at a suitable moment.
 If the TABLETS or EXTRA DRY option has been
selected, the total duration of the programme will
increase.
 The Tablets option is incompatible with the
programmes: Quick, Soak, Guest Wash.
 The Extra Dry option is incompatible with the
programme: Soak.
* Only available in selected models.
EN
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières