Use; Specifications - Elipson Infinite 8 Mode D'emploi

FR

USE

Break-In-Period
Once unboxed, the Elipson Infinite loudspeakers are not immediately able to restitute all
frequencies with equal efficiency. The drivers used in the Infinite range are equipped with
complex mechanical components which require a period of adaptation ("break-in") to
perform at their best and adjust to the temperature and humidity of their environment.
This break-in period may last for several weeks, but you can speed up the process by using
the speakers to diffuse a radio program for 20-50 hours non-stop at moderate volume.
Cable selection
Choose high-quality cables (preferably Oxygen Free Copper) with an appropriate cross-
section (>2,5mm ) and length. Your Elipson dealer will be able to advise you.
2
Amplifier selection
The characteristics of your home theatre installation are decisive when selecting an
amplifier. We recommend choosing an amplifier with an output power (RMS) superior to
the nominal power handling of your Elipson Infinite loudspeakers. At moderate volume,
the power supplied by the amplifier will be sufficient to keep distortion at a minimum
level, and the speaker's drivers will thus be protected from damage.
Providing the amplifier with headroom ensures optimal performance,
on the condition of maintaining reasonable volume levels. We advice
you to connect our Elipson Infinite A1000 amplifier to our Elipson
Subwoofer Infinite S12, both have been designed and engineered to
perfectly work.
Your Elipson dealer will be able to advise you on the most suitable amplifier for your
system.
Care and Maintenance
In order to maximize the durability of your speakers, we recommend cleaning them
regularly. Use a soft cloth to remove dust and a moistened cloth - with a small amount of
gentle soap if necessary - to remove stains. The lacquered front panel may be cleaned
with a soft cloth and standard glass cleaner.
Never use solvents, detergents, alcohol, corrosive products, scrapers or scouring pads, as
this may damage the speakers.
40

SPECIFICATIONS

Models Infinite 8
Loudspeaker
Front/central
type surround/Atmos
2-way sealed
In/On-Wall
In/On-Ceiling
Power 100W RMS
200W Peak
1.15" Ring type
Drive unit
dome tweeter
6.5" Mid-bass
Sandwich cone
Rohacell
®
Carbon Fiber
Frequency
75 Hz - 30 kHz
response
Sensitivity
88 dB/1W/1m
Impedance 8 Ohms
(4 Ohms minimum)
Inputs SpeakOn,
banana plugs
Finish Satin,
aluminium faceplate
Colour Black
Dimensions
(W x H x D)
(with grill) 330 x 440 x 138 mm
Dimensions (W x H x D)
(without grill)
330 x 440 x 125 mm
Cutting
(W x H)
dimensions 280 x 420 mm
Recessed
With/without wall brackets
depth 112 mm / 100 mm
Packaging
(L x W x H)
dimensions 535 x 425 x 250 mm
Net/Gross
10 kg / 12 kg
weight
41
Infinite 14 Infinite S12
Front Subwoofer
central/surround Passive
2-way sealed Front
ported
In-Wall In-Wall
On-Wall On-Wall
150W RMS 500W RMS
300W Peak 1000W Peak
1.15" Ring type
dome tweeter
2 x 6.5" Mid-bass 12" Woofer :
Sandwich cone Voice Coil D3"
Rohacell Large excursion
®
Carbon Fiber Neodymium magnet
60 Hz - 30 kHz 28 Hz to -3dB
91 dB/1W/1m 92 dB/1W/1m
8 Ohms 8 Ohms
(4 Ohms minimum) (6.5 Ohms minimum)
SpeakOn, SpeakOn,
banana plugs banana plugs
Satin, Satin,
aluminium faceplate aluminium faceplate
Black Black
(W x H x D) (W x H x D)
360 x 950 x 138 mm 450 x 950 x 273 mm
(W x H x D) (W x H x D)
360 x 950 x 125 mm 450 x 950 x 260 mm
(W x H) (W x H)
310 x 900 mm 400 x 900 mm
With/without wall brackets With/without wall brackets
112 mm / 100 mm 222 mm / 210 mm
(L x W x H) (L x W x H)
1065 x 475 x 250 mm 1085 x 590 x 415 mm
18 kg / 20 kg 33,5 kg / 36 kg