Usb Device; Error Displays - Clarion NX409 Mode D'emploi

USB DEVICE

Problem
USB device cannot be in-
serted.
USB device is not recognized.
No sound heard with the dis-
play "NO FILE" shown.
Sound skips or is noisy.
The iPod/iPhone's video
image is disturbed.
9. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD PLAYER
Display
BAD DISC
BAD DISC
BAD DISC
PARENTAL VIOLATION
WRONG REGION
If an error display other than the ones described above appears, press the Reset button.
If the problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
NX409/NZ409
Cause
The USB device has been
inserted with wrong direction.
The USB connector is broken.
The USB device is damaged.
Connectors are loose.
No MP/WMA/AAC file is
stored in the USB device.
MP/WMA/AAC files are not
encoded properly.
The TV Signal setting of the
iPod/iPhone is not set correctly.
Cause
A disc is caught inside the CD
deck and is not ejected.
A disc cannot be played due to
scratches, etc.
A disc is loaded upside- down
inside the DVD deck and does
not play.
Parental level error
Region code error
Measure
Reversing the connection
direction of the USB device, try
it again.
Replace with a new USB
device.
Disconnect the USB device
and reconnect. If the device is
still not recognized, try replac-
ing with a different USB device.
Store these files properly in the
USB device.
Use MP/WMA/AAC files
encoded properly.
Set the TV Signal setting
(NTSC/PAL) of the iPod/iPhone
correctly.
Measure
This is a failure of DVD deck's
mechanism and consult your
store of purchase.
Replace with a non-scratched,
non-warped disc.
Eject the disc then reload it
properly.
Set the correct Parental level.
Eject the disc, and replace cor-
rect region code disc.
45