Mute Button; Headphone Output; Indicator Led - Peavey Headliner 1000 Mode D'emploi

Headliner Rear Panel
18
BYPASS BUTTON
12
This button switches the compressor on and off.
VOLUME
13
This knob controls the overall volume of the amplifier.

MUTE BUTTON

14
This button disrupts the output signal to the speakers, muting the amp.

HEADPHONE OUTPUT

15
1/4" headphone output for personal monitoring.

INDICATOR LED

16
This LED has three basic functions:
POWER SWITCH
17
To apply power to the unit, flip the switch to the "ON" position. The green LED will illuminate, indicating
that power is being supplied.
Caution: The Power switch in this unit does not break both sides of the primary mains.
Hazardous energy can be present inside the chassis even when the Power switch is in the
"OFF" position.
AC POWER INLET:
18
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to
this connector to provide power to the unit.
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does
not have a ground pin, a suitable grounding adapter should be used, and the third wire should be
grounded properly. To prevent the risk of shock or fire hazard, always make sure that the amplifier and
all associated equipment is properly grounded.
*Illuminates green when power is on.
*Flashes red/green when mute button is engaged
*Flashes red when DDT is engaged.
5
19
21 23
20 22 24
25