Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.2 Display (H20D series)
"Temp" and
"Stir" or "Mot"
Real
value
Temperature
Remote
External
control
probe
Characters
Displays the temperature when the
"ºC"
heating function is ON.
Displays the stirring speed when the
stirring function is ON.
Displays a "Hot" warning if the
heating plate's temperature is above
"Hot"
50°C after switching OFF the heating
function.
Displayed when using the external
"Probe"
temperature sensor.
Displayed when using the remote
"Remote"
control.
"Err"
Displayed in case of an error.
Displays
Set value/
temperature or stirring speed value
Real value
when the function is ON.
Note：
If both the heating and stirring
functions are started at the same
time, the heating function is always
the priority. In that case, if the speed
is changed by turning the stirring
knob, the display will show the
stirring speed for 5 seconds and
then goes back to the temperature.
Stir or Mot
Hotplate
warning
Figure 6
Descriptions
the
real
Table 3
8
Error
Set value
and
set
Publicité
Table des Matières
