Installation Instructions; How To Use These Instructions - HEIDENHAIN ND 1400 QUADRA-CHEK Mode D'emploi

ND 1400 QUADRA-CHEK

Installation Instructions

Operating Instructions available at www.heidenhain.de

1. How to use these instructions

The installation instructions contained in this document provide the information necessary
to install this product. Operating information can be found in the ND 1400 QUADRA-CHEK
Operating Instructions, ID 734901. The Operating Instructions can be downloaded from
www.heidenhain.de.
These instructions are intended for use by personnel qualified to install, operate and
maintain the HEIDENHAIN ND 140x QUADRA-CHEK.
A qualified person is someone whose technical education, knowledge and experience,
as well as knowledge of the relevant system of rules qualifies the person to evaluate the
delegated task and recognize possible hazards.
Messages shown in these instructions
The following examples show how safety, property damage and general advice messages
are shown in these instructions. Read and understand these types of messages before
proceeding to prevent personal injury or property damage.
Messages about other safety messages. These supplemental directives do
not address specific hazards, but instead provide information that promotes
awareness and use of specific safety messages.
Warning!
Messages that provide information about the nature of a hazardous situation,
the consequences of not avoiding a hazardous situation, and methods for
avoiding a hazardous situation.
Notice
Messages that provide information primarily about situations that can lead to
property damage, the potential consequences of not avoiding the situations, or
methods for avoiding the situations and general advice messages.
Fonts used in these instructions
Items of special interest or concepts that are emphasized to the user are shown in bold
type.
Contents
How to use these instructions ................. 11
Model information ....................................12
Safety ........................................................12
Specifications ............................................13
Mounting ...................................................13
Installation .................................................14
Operating elements ..................................17
Initial power-up ..........................................17
Maintenance .............................................17
English
11