Ec Declaration Of Conformity; Causes And Solutions - Makita HW120 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
15.

EC Declaration of conformity

We Makita Corporation, Anjo, Aichi, Japan declare that the following
Makita Machine(s):
Designation of Machine
Model No / Type
Input power
Conforms to the following European Directives:
2000/14/EC, 2004/108/EC, 98/37/EC
And are manufactured in accordance to the following standards or
standardised documents: EN 60335-2-79
The Technical Documentation is kept by our authorised
Representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
The conformity assessment procedure required by Directive
2000/14/EC was in accordance with annex V
Measured Sound Power Level L
Guaranteed Sound Power Level L
30th May 2008
Mr Tomoyasu Kato
Director
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502, Japan
EN
Hot Pressure Washer
HW120
2.2 kW
:
71 dB (A)
PA
:
79.5 dB (A)
WA
16.
16.

Causes and solutions

PROBLEM
CAUSE
WATER DOESN'T COME
Dirty water filter
OUT
Blocked infeed valves
Clogged lance nozzle
WEAK OR IRREGULAR
The detergent valve is open
PRESSURE
and takes in air
Insufficient water supply
The pump intakes air
Worn out valves
Worn out/not suitable nozzle
Worn out gaskets
Exceeding water
temperature
Coil
Excessive air intake
THE BURNER DOESN'T
Dirty fuel filter
TURN ON
Dirty fuel pump filter
Dirty burner nozzle
Faulty thermostat
Broken/blocked electrovalve
Insufficient electrodes spark
Worn out motor pump joint
Absent/insufficient voltage
Air intake
NOISY MACHINE
Worn out/dirty/blocked
valves
Exceeding water temperature
PRESENCE OF WATER IN
Worn out water/oil rings
THE OIL
High percentage of humidity
in the air
OIL LEAKAGE FROM
Worn out O-rings
THE HEAD
MOTOR DOESN'T START
The plug is not working due
WHEN PRESSING THE
to overheating
SWITCH
MOTOR STOPS
Intervention of the
SUDDENLY
thermic protection due to
overheating
SOLUTION
Clean or replace
Check
Clean
Check
Check the capacity
Check
Replace
Replace
Replace
Check
Scale
Check
Check
Replace
Clean or replace
Replace
Replace
Replace
Replace
Check
Check
Check the intake hoses
Decrease the temperature
Clean or replace
Check
Replace
Check the plug, the fuse,
the cable and the
ON/OFF switch
Check the voltage
11

Publicité

Table des Matières
loading

Table des Matières