Philips HD4729 Mode D'emploi page 10

EnglisH
10
troubleshooting
If the rice cooker does not function properly or if the cooking quality is insufficient, consult the table
below. If you are unable to solve the problem, please contact the Philips Consumer Care Centre in
your country.
Problem
The cook light
does not go on.
The warm light
does not go on
when the
cooking process
is finished.
Water spills out
of the appliance
during rice
cooking.
The rice is not
cooked.
The rice is
cooked too hard.
The rice is
cooked too soft.
The rice is
scorched.
The rice cooker
does not
automatically
switch to keep-
warm mode.
Cause
There is a connection
problem.
The light is defective.
The light is defective.
Too much water was
used for cooking rice.
Not enough water has
been added.
The cooking process
has not started.
The inner pot is not
properly in contact
with the heating
element.
The heating element is
damaged.
Not enough water
was used for cooking
rice.
Too much water was
used for cooking rice.
The rice has not been
rinsed well.
The temperature
control is defective.
Solution
Check if the rice cooker is connected to the mains
and if the plug is inserted firmly into the wall socket.
Take the appliance to your Philips dealer or a service
centre authorised by Philips.
Take the appliance to your Philips dealer or a service
centre authorised by Philips.
Make sure that you add water to the level indicated
on the scale inside the inner pot that corresponds to
the number of cups of rice used. Make sure the
water does not exceed the next level on the scale
as this may cause overflow during cooking.
Add water according to the scale on the inside of
the inner pot (see chapter 'Using the appliance').
You have failed to press down the control lever to
start the cooking process.
Make sure that there is no foreign residue on the
heating element.
Take the appliance to your Philips dealer or a service
centre authorised by Philips.
Add slightly more water to the level indicated on the
cale inside the inner pot that corresponds to the
number of cups of rice used. Make sure the water
does not exceed the next level on the scale as this
may cause overflow during cooking.
Make sure you add water according to the scale on
the inside of the inner pot (see chapter 'Using the
appliance').
Rinse the rice until water runs clear.
Take the appliance to your Philips dealer or a service
centre authorised by Philips.