Galletti ACQVARIA i Manuel D'installation, Utilisation Et Entretien page 22

Unité terminale type cassette avec moteur bldc 3 - 10 kw
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Dear Customer,
Thank you for placing your trust in one of the products of Galletti S.p.a
This product is the result of our work and our commitment to design, research, and production and has been
made from the finest materials, employing state-of-the-art components and production technology.
The CE marking of the product ensures its compliance with the safety requirements of the following directives:
the Machinery Directive, the Electromagnetic Compatibility Directive, the Electrical Safety Directive, and the
Pressure Equipment Directive. Fulfillment of the Ecodesign requirements is fully in keeping with the environ-
mental awareness that has always guided our company.
The company certification of the Quality and Safety management system ensures that product quality is
constantly checked and improved, and that the product is manufactured in full compliance with the highest
standards.
By choosing our product, you have opted for Quality, Reliability, Safety, and Sustainability.
At your disposal, once again.
Galletti S.p.a
DECLARATION OF CONFORMITY
Galletti S.p.A., whose head office is located at via Romagnoli 12/a, 40010 Bentivoglio (BO) - Italy, hereby declares, under its own
responsibility, that the ACQVARIA cassette fan coil units are manufactured in accordance with the following directives: 2006/42/
EC, 2014/30/EU, 2014/35/EU, ERP DIRECTIVE 2009/125/EC, 2011/65/EU.
Compliance has been verified with reference to the following standards:
European standards for low voltage directive (safety):
Ū EN60335-1:2012
Ū EN60335-2-40:2003+ A11:2004+ A12:2005+ A1:2006+ A2:2009 (Remark: 60335-2-40 Annex ZE for Machine Directive)
Ū EN60335-1:2002+ A1:2004+ A11:2004+ A12:2006+ A2:2006 + A13:2008+ A14:2010 +A15:2011
Ū EN50366:2003+A1:2006
European standards for electromagnetic compatibility (emc):
Ū EN55014-1:2006+ A1:2009+ A2:2011
Ū EN55014-2:1997+A1:2001+ A2:2008
Ū EN61000-3-2:2006+A1:2009+A2:2009
Ū EN61000-3-3:2008
This declaration covers also all the available accessories and options only if installed in accordance to their own mounting
instructions.
Bentivoglio, 15 June 2020
Michele Galletti
CEO

Publicité

Table des Matières
loading

Table des Matières