Troubleshooting; Faqs: Frequently Asked Questions - LG LFCC22426 Série Manuel Du Propriétaire

Masquer les pouces Voir aussi pour LFCC22426 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

FAQs: Frequently Asked Questions

Q:
What are the best temperature settings for my refrigerator and freezer?
A:
The default setting for the refrigerator is 37° Fahrenheit (3° Celsius). The default setting for the
freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired
temperatures. Milk should be cold when stored on the inner shelf of the refrigerator. Ice cream should
be firm and ice cubes should not melt in the freezer. To switch the display from Fahrenheit to Celsius,
press and hold the Freezer and Refrigerator buttons until you hear a beep and the settings in the
display change. On some models, you can also select the Refrigerator Manager application on the
display and use the Unit button.
Q:
How do I set the refrigerator and freezer temperatures?
Continually press the Refrigerator or Freezer button on the control panel until the desired
A:
temperature appears. The numbers will cycle from highest to lowest and then return to the highest
again with continuous pressing. On some models, you can also set the temperatures in the
Refrigerator Manager application on the display.
Q:
Why do I hear a buzzing noise from my refrigerator periodically?
A:
This may happen if you do not have a water source attached to your refrigerator and the icemaker is
turned on. If you do not have a water source attached to the back of the refrigerator you should turn
the icemaker off.
Q:
Why does the icemaker tray look crooked?
A:
This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt.
The change in position is to assist in the freezing process.
My refrigerator is powered on and the controls are working, but it's not cooling and the display
Q:
shows "OFF" (see below). What is wrong?
A:
The refrigerator is in Demo Mode. This mode disables cooling to save energy while the appliance
is on display in a store. To restore normal operation, press and hold the Refrigerator and Ice Plus
buttons for 5 seconds or until you hear a beep and the temperature settings appear on the display.
Use the same procedure to return the refrigerator to Demo Mode, if desired.
TROUBLESHOOTING
41

Publicité

Table des Matières
loading

Table des Matières