TECO 302 Série Traduction Des Instructions Originales page 107

Before carrying out any operations, remember to insert the safety
piece of wood between the lower booms and the base frame (Ref.
Fig. 15).
Before compressed air connection, fill in the hydraulic cylinders
with oil.
1
Preliminary operations
The lift has been designed to be used in covered and sheltered places.
The place of installation must not be next to washing areas, painting workbenches, sol-
vent or varnish deposits. The installation near to rooms, where a dangerous situation of
explosion can occur, is strictly forbidden. The relevant standards of the local Health and
Safety at Work regulations, for instance, with respect to minimum distance to wall or other
equipment, escapes and the like, must be observed.
Lighting must be carried out according to the effective regulations of the place of instal-
lation. All areas next to the lift must be well and uniformly lit. All areas of the lift must
be illuminated uniformly and sufficiently to ensure the adjustment operation and main-
tenance manual provided by avoiding shadows, reflections and glare
Operator's manual
7.1 Checking for room suitability
7.2 Lighting
15
1
UK
107