Front Panel - Pioneer X-HM32V-K Mode D'emploi

02 Part names and functions

Front panel

1 STANDBY/ON button
Switches the receiver between standby and on (page 16).
2 Remote sensor
Receives the signals from the remote control.
3 TIMER indicator
Lights when the unit power is off but when the timer setting is
activated.
4 Character display
See Display on page 11.
5 Volume control
Use to set the listening volume (page 16).
6 INPUT button
Selects the input source.
Long press to change to BT STANDBY mode.
7 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers
(page 18).
10
En
1 2 3
 STANDBY/ON
TIMER
INPUT
PHONES AUDIO IN
6 7 8 9
4
   
10 11
8 AUDIO IN socket
Use to connect an auxiliary component using a stereo
minijack cable (page 32).
9 USB terminal
Use to connect your USB mass storage device or Apple iPod/
iPhone/iPad as an audio source (pages 20 and 27).
10 Disc tray
Place the disc, label side up (page 21).
11 Playback control buttons
Select the desired track or file to be played back. Stop current
playback. Stop playback or resume playback from the point
where it was paused.
12 Disc tray open/close button
Use to open or close the disc tray (page 21).
5
VOLUME

12