Setting Up The Charger; Understanding M Battery Charger Led (Light-Emitting Diode) Indicators - Advanced Bionics CI-5607 Instructions D'utilisation

Setting up the charger

To use the M Battery Charger with a wall outlet for
charging:
Place the M Battery Charger on a flat surface.
Connect the micro USB end of the power supply cable
into the charger.
Connect the power supply cable to the USB wall adapter.
Plug the wall adapter into the wall outlet.
To use the M Battery Charger with a USB port for charging:
Place the M Battery Charger on a flat surface.
Connect the micro USB end of the power supply cable
into the M Battery Charger.
Insert the USB jack into a USB port (on a computer,
in a car, etc.).
Understanding M Battery Charger LED (light-emitting
diode) indicators
The M Battery Charger has different indicator lights that
are located at the base of each charging port, as well
as where the power cable enters the charger. If the light
near the power jack is lit and green in color, it means the
charger is connected to a power source and ready to
charge the M Batteries. If the light near the power jack is lit
and red in color, this indicates a fault condition.*
14