Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Personalisations
C
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table).
The temperature can be lowered, or even set to a cold wash ( ).
Note. To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by conti-
nuously rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set
frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.
Option
Effect
Bleaching cycle de-
signed to remove the
toughest stains.
Bleaching
This option redu-
ces the amount of
creasing on fabrics,
making them easier
to iron.
Easy iron
Increases the efficien-
cy of the rinse.
Extra Rinse
The washing machine
will not carry out a
spin cycle.
Spinr exclusion
Comments
Please remember to pour the bleach into extra compartment 4
(see page 10).
This option is incompatible with the EASY IRON option
Recommended when the appliance has a full load or with large
quantities of detergent.
We recommend that you use it when washing garments which are
difficult to iron.
GB
Enabled
with pro-
grammes:
2, 3, 4,
,
, 8 and
Rinse cycle.
1, 2, 3, 4,
,
, 8,
9, 10, 11.
1, 2, 3, 4,
,
, 7,
8, 9, 10, 11,
13, 14, and
Rinse cycle.
All pro-
grammes
except for
draining
9
Publicité
Chapitres
Table des Matières
