Auto Tuning (Analogue Mode Only); Programme Sorting (Analogue Mode Only) - Sony Bravia KDF-E50A11E Mode D'emploi

Auto Tuning (Analogue mode only)

Programme Sorting (Analogue mode only)

30
GB
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for a new channels that have been
launched by broadcasters).
1
Press OK to select "Auto Tuning".
2
Follow step 1 of "Auto-tuning the TV" (page 13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
Changes the order in which the analogue channels are stored on the TV.
1
Press OK to select "Programme Sorting".
2
Press M/m to select the channel you want to move to a new position,
then press OK.
3
Press M/m to select the new position for your channel, then press OK.
Repeat the procedure in steps 2 and 3 to move other channels if required.