Safety Guard - INVENTOR G3INV-20DTB Manuel D'emploi

SAFETY GUARD

1. Fix the heater properly when mounting on a wall or when standing.
2. The heater is to be installed so that the controls cannot be touched by a person using a bath
or shower.
3. The heater must not be installed directly under a socket outlet.
4. When the heater is working in free standing mode with the foot set, please do not use it in
the vicinity of bath, shower, or swimming pool.
5. When the heater is working on wall mounted mode, do not touch the control unit when using
it in the vicinity of bath, shower or swimming pool.
6. Consult a qualified electrician or service technician if the power cord is damaged.
7. DO NOT cover the heater when it is working.
8. Always store the heater when not in use.
9. Make sure the heater has cooled down before storing.
10. This heater is not equipped with a device to control the room temperature. Do not use this
heater in small rooms when they are occupied by persons not capable of leaving the room
on their own, unless constant supervision is provided.
10