Using Your Sonicare; Brushing Instructions - Philips Sonicare 2 Série Mode D'emploi

Charging your Sonicare
1 Plug the charger into a live electrical outlet.
2 Place the handle on the charger.
, The battery level indicator flashes to indicate
that the toothbrush is charging. When the
light stops flashing and turns solid green the
toothbrush is fully charged.
Note: It can take up to 48 hours to fully charge the battery,
but the Sonicare may be used before it is fully charged.

Using your Sonicare

Brushing instructions

1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle towards the gumline.
3 Press the power on/off button to turn on the
Sonicare.
4 Apply light pressure to maximize Sonicare's
effectiveness and let the Sonicare toothbrush
do the brushing for you. Do not scrub.
5 Gently move the brush head slowly across
the teeth in a small back and forth motion so
the longer bristles reach between the teeth.
Continue this motion throughout the brushing
cycle.
ENGLISH
7