Philips Sonicare 2 Série Mode D'emploi page 10

ENGLISH
10
, To activate Easy-start: Press and hold the power
on/off button for 2 seconds. You hear 2 beeps and
the battery level indicator flashes green to indicate
that the Easy-start feature has been activated.
, To deactivate Easy-start: Press and hold the
power on/off button for 2 seconds. You hear
1 beep and the battery level indicator flashes
yellow to indicate that the Easy-start feature has
been deactivated.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the Easy-
start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
Sonicare's effectiveness in removing plaque.
Cleaning
Do not clean the brush head, handle or charger in
dishwasher.
Toothbrush handle
1 Remove the brush head and rinse the metal
shaft area with warm water.
Do not push on the rubber seal on the metal shaft
with sharp objects, as this may cause damage.
2 Use a damp cloth to wipe the entire surface of
the handle.