LEXIBOOK KLS100 Série Mode D'emploi page 17

luetooth®
n off.
se the on-
ose on the
other end
mputer.
audio jack
e (such as
ome out of
ur internet
e left. The
KLS100seriesIM1216_V10_217YL.indb 17
6. Unplug the cable from the speaker and the computer.
Connecting to a computer
1. Connect the 3.5mm audio cable to the speaker's audio in jack (7)
and the other end of the cable to your computer.
2. Turn the speaker on. The LED (4) lights up in blue.
3. Open an audio player software on your computer. Click on the
play button to make the sounds come out of the speaker and
listen to your desired audio file.
4. You can also listen to audio files from Internet. Open your internet
browser and select an online player.
5. To turn the speaker off, slide the power button (5) to the left. The
LED (4) light turns off.
6. Unplug the cable from the speaker and the computer.
Note: Previous and next buttons on the Bluetooth® speaker do not
respond when connected by audio cable to any audio device or
TROUBLESHOOTING
Problem
The Bluetooth® device and
speaker are not pairing
Solution
Ensure the Bluetooth® speaker is
charged and power switch is on.
Ensure the Bluetooth® function on
the Bluetooth® device is activated.
17
26/5/16 11:17 am